top of page
Standard Fume Cupboard
Fume hoods are essential systems designed to ensure the safety of laboratory personnel working with hazardous gases, smoke, particles, and liquid substances. STAHL-LAB's standard fume hoods are ergonomically designed to meet the demands of chemical processes involving high concentrations of low-corrosive substances. Manufactured in compliance with EN 14175 EU standards, these fume hoods are engineered to enhance performance while prioritizing health and safety. Certified with a CE mark, they guarantee user and environmental protection. Additionally, optional drainage management systems are available to further optimize functionality.
 
DIMENSIONS(mm)
Width1200 / 1500 / 1800
Depth950
Height2350/2650
Worktop Length900 / 1200 / 1500
Worktop Width730
Interior Height1400
Work Bench Height900
 
ELECTRICITY 
Electrical SocketsIP44 220V-16A Electrical Sockets/ Optional Three-phase Sockets
Fuse Box16A / 32A
LightningIP65 Protective Lightning
Emergenecy ButtonIP65 Emergency Button
ControllerCompliant with EN 14175 Standatds, fan suction speed controller
 
SPECIFICATIONS 
SashSafety Glass with Horzontal and Vertical Movement
ConstructionGalvanized Steel
PaintElectrostatic Powder Paint
Working SurfaceIndustrial Ceramic
Solid Grade Laminate
Epoxy Resin
Stainless Steel
Fume Cupboard FootChemical resistant foot that can counter ground slopes
 
WATER AND GAS CONNECTIONS 
Water ConnectionsCompliant with DIN 12898 Standard
Armatures and valves are compliant with EN 13792 and have color codes.
Compliant with ISO228 / 1 Standard and B Tolerance Class.
Manufactured in accordance with DIN 12918.
SinkPolypropylene (PP)
Epoxy Resin
Stainless Steel
Industrial Ceramic
Gas ConnectionsCompliant with DIN 12898 Standard
Armatures and valves are compliant with EN 13792
Compliant with ISO228 / 1 Standard and B Tolerance Class.
Manufactured in accordance with DIN 12918.

Standard Fume Cupboard

0,00₺Fiyat

  • Maintaining Your Stainless Steel Worktop and Sink

    To ensure your stainless steel worktop and sink remain in excellent condition for decades, please follow these essential care instructions:

    • Initial Cleaning
      Before first use, thoroughly wash the surface with an alkaline detergent (pH over 8). Rinse well and dry completely.
      Note: Installation may leave impurities on the surface. Removing these will allow the chromium in stainless steel to react with oxygen, forming a protective passive layer.

    • Daily Maintenance
      After each use, clean the surface with a soft cloth, sponge, or towel using warm water and a liquid detergent. Rinse thoroughly with water and dry with a soft cloth.

    • Stain Removal Guidelines
      For tough stains, including grease, discoloration from coffee or tea, salt and lime marks, and rust stains, follow these steps:

      • Use a cleaning paste with a pH over 8 (e.g., Cif Cream or Universal Stone) along with a soft cloth or sponge.
      • Apply the detergent, allow it to sit for 15 minutes, then rinse with warm water and dry.
      • For dried lime stains, a 25% vinegar solution can be effective. Let it sit briefly before cleaning, rinsing, and drying the surface.

    Avoid the Following
    To maintain the integrity of your stainless steel:

    • Refrain from using acidic substances, such as kitchen soaps containing citric acid (pH under 6), as they can damage the surface.
    • Avoid scouring powders and steel wool, which may scratch the finish.
    • Do not leave wet cast iron pans or other rust-prone metallic utensils on the surface for extended periods, as they may leave marks.

    By following these guidelines, you can ensure the longevity and appearance of your stainless steel worktop and sink.

bottom of page